Highfields Amateur Radio Club
Constructors Corner.

For Alinco Mic Wiring see: Alinco Mic Wiring page.

A lot of the Alinco hand held transceivers can use a cloning cable to copy the memory settings etc from one handset to another. Look below and see if yours is listed (if it's not and you have the handbook that tells you about the cloning feature, let me know so I can add it).

All information is from radio handbooks that show the connections, please don't complain if it doesn't work as I have not personally tested them.

DJ-191, DJ-193, DJ-195, DJ-196, DJ-446, DJ-493, DJ-580, DJ-593,
DJ-596, DJ-F1T, DJ-F4T, DJ-G1T, DJ-G5T, DJ-S1T, DJ-S4T,
DJ-S40, DJ-S45, DJ-S446:

See the Home build an OPC-474 cable page as the Icom OPC-474 and this Alinco lead are the same.

Also fits some Yaesu radios.

DJ-C1, DJ-C4, DJ-C5, DJ-C6, DJ-C7, DJ-V5:

For the cloning lead on these sets use a pair of 2.5mm stereo plugs connected tip to tip, ring to ring and sleeve to sleeve. On the DJ-V5 use the mic jacks for cloning.

Also fits some Yaesu radios.

DJ-G7, DJ-S17, DJ-S47, DJ-V17, DJ-V446:

Plug is 3.5mm 4 pole screw type. Will also fit some Yaesu radios.